Detailed Product Description
The HPM-P series high pressure foaming machine with cyclopentane is
widely used in all the non-HCFC polyurethane foaming industries
such as refrigeration applications---refrigerator, freezer cabinet,
waterheater, disinfection cabinet thermal insulation layer and air
conditioning sandwich panel, exactly meet your requirement of
producing Green-products for worldwide market.
Advantages of the HPM-P machine:
Themain parts such as metering pump, high pressure mixing head,
high pressure pipe & fittings, Electric system PLC element, gas
detectors and monitoring system, etc. are imported from developed
country, technical performance as well as the safety performance is
better.
Large safety-coefficient magnetic coupling between the metering
pump and motor with absolutely non-leakage, ensure the safety
degree and long lifespan of the metering unit.
Certificated whichmeet GB150-1998 Standard for the pressurized
vessels such as polyol /cyclopentane tank and isocyanate container.
Main Technical Parameter
* Type: HPM180P, HPM100P, HPM40P,
* Suitable foaming system: rigid foam, half-rigid foam.
* Suitable material viscosity at 22 degree Centigrade:
Polyolmax.2500 mPa.s,
Isocyanate: max.1500 mPa.s,
* Mixing ratio range adjustable 5:1 ~ 1:5
* Pouring programming time: 0.50~99.99sec
* Water supply required: processed running water, flow capacity:
300L/min. Brings R1 " the ball valve;
*The compressed air supply required: 0.7 Mpa, flow capacity:
600NL/min.Dry,oil-less , the dew point at 20 degrees below zero
centigrade; with the1.0Mpa pressure relief valve and R3/4" the ball
valve;
*The nitrogen supply required (if needs): 0.7 Mpa, flow
capacity:600NL/min.With the 1.0Mpa pressure relief valve and R3/4
the ballvalve;
* Power supply required3× 380V/50HZ±10% or as customer's local
condition
* Control voltageAC110V/DC24V;
Explosion-proof measures on the machine:
Enclosure and gas-exhausting system for theunits of polyol
/cyclopentane;
The flammable gas detecting and monitoring system;
Nitrogen gas pressurization for the container;
Ex type of the motors, valves and relevant electric elements;
Grounding;
Leakage monitoring and control;
Nitrogen gas filling for the mixing head pouring area (mold or
cabinet space);
A long distance monitoring system is used for the production area.
